KoCAD · Mga problema at solusyon
What to do when… (modeling, 3D view, files and printing problems)
Likely cause and fix for the most common day-to-day KoCAD problems.
Hindi pa naisasalin ang artikulong ito sa inyong wika: ipinapakita ang bersyong English.
Sa pahinang ito
The extrusion does not make a solid
Cause: the sketch outline is not closed or lines cross. Fix: zoom in and join loose points, or redraw with Rectangle/Circle; delete the extra line.
The sketch turned red
Cause: over defined (an extra dimension or relation). Fix: delete the red dimension or relation.
A feature went into error after editing
Cause: the face or edge it used changed. Fix: double-click it, pick the reference again and confirm.
"Could not start the 3D view"
Cause: graphics without OpenGL 3.3, an old driver or remote desktop without a graphics card. Fix: update the driver; in Options → Graphics (GPU) choose the card and restart.
3D is slow in a large assembly
Fix: View → Large assembly mode; Isolate what matters; choose the dedicated card in Options → Graphics. Click CPU/Memory on the status bar to see usage.
KoCAD closed suddenly
Fix: open it again and use Recover work. If it repeats, use Help → Report a problem with a screenshot and what you were doing.
The STEP opened without material or with the wrong mass
Cause: the source CAD does not export material or used "Generic". Fix: set the material in the tree.
A SolidWorks file opens only as an image
Cause: the STEP with the same name and SolidWorks on the PC are both missing. Fix: ask the author for the STEP.
GLB/OBJ/STL without interference checking
Cause: they are display meshes. Fix: open the STEP.
A customer DXF opens tiny or huge
Cause: a different unit (inches) or a sheet scale. Fix: check the units when opening and use Zoom to fit.
The print is not to scale
Cause: the printer fits to page. Fix: print at 1:1 without fitting; check the printed ruler.
The video does not export
Cause: on Linux GStreamer with H.264 is missing; or the name already exists. Fix: install GStreamer; choose a new name.
Flatten is greyed out
Cause: the part is not sheet metal. Fix: Convert to Sheet Metal, or model it with Base Flange.
The update failed
Cause: corrupted download or another KoCAD open. Fix: close the others and try again; if it persists, reinstall from the portal.
Related articles
- What to do when… (sign-in, license, PCs and AI)
- KoCAD frequently asked questions (use, files, standards and AI)
- How to save, save the complete project, and recover work after a crash