KoCAD · Pantallas y funciones
How to repeat features: linear pattern, circular pattern and mirror
Copy holes and cut-outs in a line, around a circle or to the other side of a plane, keeping them linked to the original.
Este artículo aún no está traducido a su idioma: se muestra la versión en English.
En esta página
What this is for
Flange holes, slots in a row, symmetric tabs: instead of drawing each one, make one and repeat it. The copies stay linked to the original — change the first and they all change.

Linear Pattern ①
- Select the feature to repeat (for example a hole) in the tree.
- Click Linear Pattern.
- Choose the direction (an edge or axis), the spacing and the number of copies. A second direction makes a grid.
- Confirm with ✓.
Circular Pattern ②
- Select the feature.
- Click Circular Pattern.
- Choose the axis (a circular edge, an axis or a cylindrical face), the number of copies and the total angle (360° = full turn).
- Confirm.
Mirror ③
- Select the feature (or the body).
- Click Mirror.
- Choose the symmetry plane (for example the Right Plane).
- Confirm. The mirrored copy appears on the other side.
Common mistakes
- Copies go outside the part: reverse the direction or reduce the spacing.
- I cannot delete just one copy: edit the pattern and skip that instance, or lower the count.
- Mirror fails: the plane is not a symmetry plane or the feature depends on something that does not exist on the other side.
Related articles
- How to make holes with the Hole Wizard (clearance, tapped, counterbore, countersink)
- How to round corners, chamfer, shell and add ribs
- How to repeat and replace components and work with large assemblies