Ir al contenido

KoCAD · Pantallas y funciones

How to repeat and replace components and work with large assemblies

Component pattern, Replace component, open a part of the assembly in its own tab and large assembly mode.

Actualizado Versión actual KoCAD 0.43.7PC (Windows, etc.)

Este artículo aún no está traducido a su idioma: se muestra la versión en English.

En esta página

What this is for

Real assemblies have dozens of identical bolts, parts that change version and sometimes thousands of components. These commands save clicks and keep KoCAD fast.

Component pattern

  1. In the assembly, click Component pattern (Assembly tab).
  2. Choose the component to repeat (for example a bolt already mated).
  3. Choose linear (direction, spacing, count) or circular (axis, count, angle).
  4. Confirm. The copies follow the original.

Replace component

  1. Select the component in the tree.
  2. Click Replace component and choose the new file.
  3. KoCAD tries to keep the mates; check any that end up in error and pick the reference again.

Edit a part of the assembly

  • Alt + click or double-click goes into the part; or right-click → Open in its own tab.
  • Save the part; the assembly updates when you go back.

Large assemblies

  • View → Large assembly mode (Auto turns on above 1,500 parts): draws by colour groups and hides small parts while rotating.
  • Isolate and Hide keep only what matters on screen.
  • In Options → Display & performance you can keep it always on or off.

Common mistakes

  • Component pattern is grey: it only works inside an assembly.
  • After replacing, the part moved: the new part does not have the same face; redo the mate.
  • Rotation stutters: turn on large assembly mode and check the graphics driver.

Related articles

  • How to assemble parts: new assembly, insert components and mates
  • View tab: orientation, styles, section, hide/isolate and windows
  • How to open and import files (KoCAD, STEP, IGES, STL, DXF, SolidWorks and more)

¿Le ayudó esta página?