Ir al contenido

KoCAD · Pantallas y funciones

How to round corners, chamfer, shell and add ribs

Fillet, Chamfer, Shell and Rib: the finishing tools of the Modify group, step by step.

Actualizado Versión actual KoCAD 0.43.7PC (Windows, etc.)

Este artículo aún no está traducido a su idioma: se muestra la versión en English.

En esta página

What this is for

After the basic shape come the finishes: rounded corners (Fillet), corners cut at 45° (Chamfer), a hollow part with a thin wall (Shell) and thin stiffeners (Rib). They are in the Modify group of the Features tab.

Modify group of the Features tab with Fillet, Chamfer, Shell and Rib numbered
Modify group of the Features tab with Fillet, Chamfer, Shell and Rib numbered

Fillet ①

  1. Click Fillet.
  2. Click the edges to round (or a face to take all its edges).
  3. Type the radius. Confirm with ✓.

Chamfer ②

  1. Click Chamfer.
  2. Pick the edges.
  3. Type the distance (C) — and the angle if it is not 45°. Confirm.

Shell ③

  1. Click Shell.
  2. Click the face that should stay open (for example the top of a box).
  3. Type the wall thickness. Confirm. The part becomes hollow with that wall.

Rib ④

  1. Draw a line in a sketch that crosses the part where the stiffener goes.
  2. Click Rib and choose the sketch.
  3. Type the thickness and the side. Confirm. The rib fills up to the faces of the part.

Common mistakes

  • Fillet fails: the radius is larger than the wall or the next edge; reduce it.
  • Shell fails: some faces have fillets smaller than the thickness; reduce the thickness or do the fillets afterwards.
  • Chamfer shows without the C callout in the drawing: use the chamfer C dimension on the Annotation tab.

Related articles

  • Features tab: extrude, cut, holes, fillets and patterns
  • How to extrude and cut (boss, cut and end conditions)
  • How to repeat features: linear pattern, circular pattern and mirror

¿Le ayudó esta página?