Ir al contenido

KoCAD · Pantallas y funciones

How to ask Bob for a part or a project (text or attached drawing)

Write a good request, review the plan and the assumptions, watch the build live and undo.

Actualizado Versión actual KoCAD 0.43.7PC (Windows, etc.)

Este artículo aún no está traducido a su idioma: se muestra la versión en English.

En esta página

What this is for

Bob turns a request into real CAD steps (sketches, extrusions, holes, profiles) that you review before running. It works with text ("an L bracket in 3.2 mm sheet with 4 M8 holes") or with an attached drawing/photo ("I want this drawing in 3D").

Step by step

  1. Connect your AI (Options → Connect AI) and open Bob in Help → Support chat.
  2. Write the request with sizes in mm, material and thickness. Attach the drawing if you have one (drag, paste or clip).
  3. Bob shows the plan: the parts and operations, and the assumptions (what the request did not say and it assumed, such as material or clearances).
  4. Correct what you need by replying in the chat, or edit the assumptions.
  5. Click Run plan. The build appears live, step by step: Pause, Resume, Stop.
  6. At the end, KoCAD inspects the real model (loose parts, design rules). If something does not fit, Bob tries to fix it in a few rounds and shows what is left.
  7. Like it? Save. Do not? Ctrl+Z undoes the whole batch.

How to write a good request

  • Say what it is and what it is for ("base for a 50 kg motor").
  • Give the main sizes and the standard ("M10 clearance holes, JIS").
  • Give the material and thickness ("SS400 plate t6").
  • Split a big request: first the base, then the brackets.

Common mistakes

  • "Connect your account…": no AI connected on this PC.
  • Part differs from the drawing: the drawing was unreadable or had no dimensions; add the sizes in the text.
  • It takes long: whole projects take minutes; progress shows in the panel. Stopping is safe.

Related articles

  • Bob, the KoCAD AI assistant (with your own AI)
  • How to connect your own AI to KoCAD (subscription or key)
  • How to turn a 2D drawing (DXF/DWG) into a 3D part
  • How to check the design before sending it to the shop (Verification and JIS rules)

¿Le ayudó esta página?