KoCAD · Màn hình & chức năng
How to round corners, chamfer, shell and add ribs
Fillet, Chamfer, Shell and Rib: the finishing tools of the Modify group, step by step.
Bài viết này chưa được dịch sang ngôn ngữ của bạn: đang hiển thị bản English.
Trong trang này
What this is for
After the basic shape come the finishes: rounded corners (Fillet), corners cut at 45° (Chamfer), a hollow part with a thin wall (Shell) and thin stiffeners (Rib). They are in the Modify group of the Features tab.

Fillet ①
- Click Fillet.
- Click the edges to round (or a face to take all its edges).
- Type the radius. Confirm with ✓.
Chamfer ②
- Click Chamfer.
- Pick the edges.
- Type the distance (C) — and the angle if it is not 45°. Confirm.
Shell ③
- Click Shell.
- Click the face that should stay open (for example the top of a box).
- Type the wall thickness. Confirm. The part becomes hollow with that wall.
Rib ④
- Draw a line in a sketch that crosses the part where the stiffener goes.
- Click Rib and choose the sketch.
- Type the thickness and the side. Confirm. The rib fills up to the faces of the part.
Common mistakes
- Fillet fails: the radius is larger than the wall or the next edge; reduce it.
- Shell fails: some faces have fillets smaller than the thickness; reduce the thickness or do the fillets afterwards.
- Chamfer shows without the C callout in the drawing: use the chamfer C dimension on the Annotation tab.
Related articles
- Features tab: extrude, cut, holes, fillets and patterns
- How to extrude and cut (boss, cut and end conditions)
- How to repeat features: linear pattern, circular pattern and mirror