Đến nội dung

KoCAD · Màn hình & chức năng

How to convert a solid (or a STEP) to sheet metal and check manufacturability

Turn a part modelled as a solid into a sheet-metal part so it can be flattened, and check holes, flanges and reliefs.

Cập nhật Phiên bản hiện tại KoCAD 0.43.7PC (Windows…)

Bài viết này chưa được dịch sang ngôn ngữ của bạn: đang hiển thị bản English.

Trong trang này

What this is for

Sheet-metal parts that arrive as STEP from another CAD, or that you modelled with extrusions, are "solids" for KoCAD: they do not flatten. Convert to Sheet Metal recognises the constant-thickness walls and the bends, and turns the part into real sheet metal.

Step by step: convert

  1. Open the part (or import the STEP).
  2. On the Sheet Metal tab, click Convert to Sheet Metal.
  3. Click a face that stays fixed (the base) and check the Thickness t KoCAD detected.
  4. Enter the Bend radius and K-factor your shop uses.
  5. Confirm. The tree gets the sheet-metal features and Flatten starts working.

Step by step: check manufacturability

  1. Click Sheet-metal manufacturability check (Sheet Metal or Evaluate tab).
  2. Read the list: each item gives the problem, where it is (click to highlight in 3D) and the rule used.
  3. Fix the model (move the hole away from the bend, lengthen the flange, add a relief) and run it again.
  • What the check looks for · Why
  • Hole too close to a bend · The hole deforms when bending
  • Flange too short · The tool cannot bend it
  • Missing corner relief · Tears or deforms at the corner
  • Radius smaller than thickness · Risk of cracking

Common mistakes

  • "Thickness not constant": the part has walls of different thickness; it is not one sheet. Split it into parts.
  • Conversion fails at a corner: the STEP corner is closed without a gap; open a small gap at the corner before converting.

Related articles

  • How to create a sheet-metal part: base flange, flanges, mitres, hems and bends
  • How to flatten sheet metal and make the laser DXF
  • How to open and import files (KoCAD, STEP, IGES, STL, DXF, SolidWorks and more)

Trang này có hữu ích không?