KoCAD · 界面与功能
How to convert a solid (or a STEP) to sheet metal and check manufacturability
Turn a part modelled as a solid into a sheet-metal part so it can be flattened, and check holes, flanges and reliefs.
此文章暂无您的语言版本,以English显示。
本页目录
What this is for
Sheet-metal parts that arrive as STEP from another CAD, or that you modelled with extrusions, are "solids" for KoCAD: they do not flatten. Convert to Sheet Metal recognises the constant-thickness walls and the bends, and turns the part into real sheet metal.
Step by step: convert
- Open the part (or import the STEP).
- On the Sheet Metal tab, click Convert to Sheet Metal.
- Click a face that stays fixed (the base) and check the Thickness t KoCAD detected.
- Enter the Bend radius and K-factor your shop uses.
- Confirm. The tree gets the sheet-metal features and Flatten starts working.
Step by step: check manufacturability
- Click Sheet-metal manufacturability check (Sheet Metal or Evaluate tab).
- Read the list: each item gives the problem, where it is (click to highlight in 3D) and the rule used.
- Fix the model (move the hole away from the bend, lengthen the flange, add a relief) and run it again.
- What the check looks for · Why
- Hole too close to a bend · The hole deforms when bending
- Flange too short · The tool cannot bend it
- Missing corner relief · Tears or deforms at the corner
- Radius smaller than thickness · Risk of cracking
Common mistakes
- "Thickness not constant": the part has walls of different thickness; it is not one sheet. Split it into parts.
- Conversion fails at a corner: the STEP corner is closed without a gap; open a small gap at the corner before converting.
Related articles
- How to create a sheet-metal part: base flange, flanges, mitres, hems and bends
- How to flatten sheet metal and make the laser DXF
- How to open and import files (KoCAD, STEP, IGES, STL, DXF, SolidWorks and more)