Skip to content

KoCAD · Screens & features

How to repeat features: linear pattern, circular pattern and mirror

Copy holes and cut-outs in a line, around a circle or to the other side of a plane, keeping them linked to the original.

Updated Current version KoCAD 0.43.7PC (Windows etc.)

On this page

What this is for

Flange holes, slots in a row, symmetric tabs: instead of drawing each one, make one and repeat it. The copies stay linked to the original — change the first and they all change.

Pattern group with Linear Pattern and Circular Pattern, and Mirror in the Modify group
Pattern group with Linear Pattern and Circular Pattern, and Mirror in the Modify group

Linear Pattern ①

  1. Select the feature to repeat (for example a hole) in the tree.
  2. Click Linear Pattern.
  3. Choose the direction (an edge or axis), the spacing and the number of copies. A second direction makes a grid.
  4. Confirm with ✓.

Circular Pattern ②

  1. Select the feature.
  2. Click Circular Pattern.
  3. Choose the axis (a circular edge, an axis or a cylindrical face), the number of copies and the total angle (360° = full turn).
  4. Confirm.

Mirror ③

  1. Select the feature (or the body).
  2. Click Mirror.
  3. Choose the symmetry plane (for example the Right Plane).
  4. Confirm. The mirrored copy appears on the other side.

Common mistakes

  • Copies go outside the part: reverse the direction or reduce the spacing.
  • I cannot delete just one copy: edit the pattern and skip that instance, or lower the count.
  • Mirror fails: the plane is not a symmetry plane or the feature depends on something that does not exist on the other side.

Related articles

  • How to make holes with the Hole Wizard (clearance, tapped, counterbore, countersink)
  • How to round corners, chamfer, shell and add ribs
  • How to repeat and replace components and work with large assemblies

Was this page helpful?