Skip to content

KoCAD · Screens & features

How to extrude and cut (boss, cut and end conditions)

Turn a sketch into a solid, remove material, choose depth, direction and what happens to other bodies.

Updated Current version KoCAD 0.43.7PC (Windows etc.)

On this page

What this is for

Extruded Boss/Base pulls the sketch outline and creates volume. Extruded Cut does the opposite: it uses the outline to remove material. They are the two most used commands in CAD.

Boss-Extrude with depth, direction, confirm button and the timeline
Boss-Extrude with depth, direction, confirm button and the timeline

Step by step: add volume

  1. Finish the sketch (closed outline) and click Extruded Boss/Base ① on the Features tab.
  2. In Depth ② type the size in mm. It can be a formula, such as width/20. The preview shows the outline before the calculation.
  3. In Direction ③ choose the end condition: Blind (the typed size), Mid Plane (half to each side) or another; and the sense (normal to the sketch or reversed).
  4. In Operation choose New body or merge into the existing body.
  5. Confirm with the green ✓ ④. The feature goes into the tree and the Timeline ⑤.

Step by step: remove material

  1. Make a sketch on the face of the part with the shape of the cut-out.
  2. Click Extruded Cut.
  3. Choose Blind with the depth, or Through All to go through the part.
  4. Confirm with ✓.

Tips

  • To change the thickness later, double-click the feature in the tree and change the depth.
  • Ctrl+D (Edit dimensions) shows the dimensions in the view to edit them directly.
  • The red ✗ cancels without changing anything.

Common mistakes

  • "Open outline": go back to the sketch and close the drawing.
  • The cut removes nothing: the direction points out of the part; reverse it.
  • Two separate solids: the operation was New body; edit it and choose merge.

Related articles

  • Features tab: extrude, cut, holes, fillets and patterns
  • How to draw a sketch with dimensions and relations
  • How to make holes with the Hole Wizard (clearance, tapped, counterbore, countersink)
  • How to edit a part from the tree and the timeline

Was this page helpful?