KoCAD · Getting started
Library by region (Brazil · ABNT/NBR, Japan · JIS)
The KoCAD library now follows the project's standard. A Japan · JIS project shows the JIS profiles and fasteners (as before); a Brazil · ABNT/NBR project shows the Brazilian catalogue: Gerdau W/HP shapes (NBR 15980), American standard I and channel sections ("U 4" x 1ª alma"), equal and unequal inch angles, flat/round/square bars, NBR 8261 / NBR 6591 tubes ("Tubo 50x50x2,00 NBR 8261"), SCH 40/80 pipe (NBR 5590), NBR 6355 formed U and lipped channels, plates by commercial gauge, ISO and UNC/UNF bolts, nuts, washers and AWS weld consumables.
The KoCAD library now follows the project's standard. A Japan · JIS project shows the JIS profiles and fasteners (as before); a Brazil · ABNT/NBR project shows the Brazilian catalogue: Gerdau W/HP shapes (NBR 15980), American standard I and channel sections ("U 4" x 1ª alma"), equal and unequal inch angles, flat/round/square bars, NBR 8261 / NBR 6591 tubes ("Tubo 50x50x2,00 NBR 8261"), SCH 40/80 pipe (NBR 5590), NBR 6355 formed U and lipped channels, plates by commercial gauge, ISO and UNC/UNF bolts, nuts, washers and AWS weld consumables.
Standard library (right panel): the panel on the right side of the workspace is called Standard library and contains only the materials and profiles of the project's standard (JIS, ABNT/NBR, etc.). This is what a customer account sees. The full KOREOS internal library (KOMORI's own catalogue, internal codes, extra data) is hidden from customer accounts — it is not disabled, simply not shown.
Where to choose: the first question of a new project is the country/standard. To change it later: Tools ▸ Options ▸ Standard (this project) or Options ▸ General ▸ Default for new projects. On first run a customer account starts with its country's standard; KOMORI internal accounts start with JIS.
Brazilian materials: ASTM A36 / NBR 7007 MR250, A572 Gr.50 / AR350, AR415, A588 (AR350 COR), A992, NBR 6648/6649/6650 plates, SAE 1020/1045, stainless AISI 304/304L/316/316L, aluminium 6061-T6, 6063-T5/T6 and 5052-H32. Click a material to see its standard, density, E, fy, fu and equivalents (e.g. SS400 ≈ A36). Drag it onto the part to apply.
Weight by standard: each profile's kg/m comes from the maker's table (W, I, U) or from section area × density (tubes, angles, bars, formed sections). The weldment cut list and the parts list add weights with these values. Tapered-flange American I/U sections are drawn with the average flange thickness; the weight is the table value.
Weldments: in a Brazilian project the member material defaults to ASTM A36 (W/HP: A572 Gr.50), and the weld bead has a Consumable field (E7018, E6013, ER70S-6, E71T-1, ER308L…) shown on the cut list.
Sheet metal: the K-factor stays 0.44 by default and can be changed per sheet.
Fasteners: the smart fastener uses the region's ISO bolts (NBR ISO 4014/4032/7089); clearance holes follow NBR ISO 273 (fine/medium/coarse).
Prices and stock: prices and stock belong to KOMORI's internal catalogue and only appear in JIS projects of internal accounts. Brazilian projects (and customers) get the standard's weights and dimensions, no prices.
Europe (EN) and USA (ASTM/AISC) are already in the standard list and will get their tables in the next versions; until then KoCAD says the standard has no data and never silently uses JIS.


