Skip to content

KoCAD · Screens & features

How to export DXF and DWG (3 views, flat pattern and 2D drawing)

Which DXF to use for what, the experimental DWG, and care with units and layers.

Updated Current version KoCAD 0.43.7PC (Windows etc.)

On this page

What this is for

Cutting suppliers, customers and other CADs ask for DXF or DWG. KoCAD makes three kinds, each for one use.

  • Output · Where · For
  • 3 views DXF (third angle) · Drawing tab, with the 3D part open · A quick sketch with front, top and side, without opening the drawing
  • Flat DXF (laser) · Sheet Metal or Drawing tab · Laser/plasma cutting of sheet-metal parts (cut and bend layers)
  • 2D drawing DXF · File → Export, with the drawing open · The complete drawing, with dimensions and title block
  • Export · DWG (experimental) · Drawing tab or File · For DWG users; check the file in the target program

Step by step: drawing DXF

  1. Open the 2D drawing.
  2. File → Export → DXF.
  3. Choose the name; KoCAD suggests the 03 · DXF folder.
  4. Open the file in the target program and check the unit (mm) and the scale.

Step by step: DWG

  1. With the part or drawing open, click Export · DWG (experimental).
  2. Choose the name and save.
  3. Open it in the target program and check texts and hatches.

Common mistakes

  • DXF opens tiny (or huge): the target program reads inches; choose mm when importing.
  • Japanese text unreadable in the target: the program does not read Shift-JIS; use the PDF for reading and the DXF for geometry only.
  • Export greyed out: expired license — renew to export again.

Related articles

  • How to flatten sheet metal and make the laser DXF
  • How to export the 3D (STEP, IGES, STL, OBJ, GLB, BREP)
  • Drawing 2D from scratch: command line, precision and DXF

Was this page helpful?