KoCAD
Lightweight 2D/3D manufacturing CAD linked to KOREOS cases.
Mga screen at feature
LahatMga daloy ng trabaho 13Pagsisimula 1Mga screen · ribbon tab 11Mga screen · panel, window at menu 6Engineering 3
Engineering
Engineering wave 4 (BETA): plate bending, heat and thermal stress, frame ΔT and the AI second opinionCalculations run in a separate program, only when you press Calculate, with Cancel. The result is bound to the document revision: editing the model during the run cancels it; editing it afterwards shows the result as OUT OF DATE and blocks the PDF until you calculate again. KoCAD 0.31 adds four studies, all BETA: a plate in bending under pressure, steady heat in a plate with thermal stress, a temperature change ΔT on frame members, and an AI second opinion on the whole project. None of them certifies capacity: the real engineering case is still pending and every result states its limits.English
Engineering studies (experimental BETA): stability, clearance, motion and bend sequence — tooling not registeredWhat it is. On-request checks on the open part or assembly: stability (tipping), clearance between bodies, rigid motion with contact, bend sequence with the tooling registered in KOREOS, and process rules (weld/tool access, stock allowance, bumping). It is experimental: every result states what it checked and what is missing; nothing here is a factory approval. Open it from Design verification → Experimental studies. Status (0.30, experimental BETA): TOOLING NOT REGISTERED. The KOREOS press-brake, punch and V-die registry is still empty — the real data was requested from the factory. So the bend sequence answers "Missing data" today and offers no order. No result on this screen is a factory approval.English
Structural analysis (BETA): stress, deflection, modal, buckling and lightest JIS profileWhat it is. A quick check of strength and deformation of the welded frame drawn in KoCAD (JIS profile members from the KOREOS library). It shows stress, deflection and utilisation in colour in the 3D view, natural frequencies and linear buckling, and suggests the lightest JIS profile that still meets the criteria. It is BETA: a linear-elastic calculation that does not certify capacity; the real engineering case (the 新200m³ base) is still pending. The decision to fabricate stays with engineering.English